Allied Telesis AT-FH705E Installationsanleitung PDF herunterladen (Seite 18)

The ports are IEEE802.3u Auto-Negotiation

compliant. This means that the ports can

automatically configure their speed and duplex

mode to match the capabilities of the end nodes

connected to the ports.

Port 5 and the Uplink Port

Port 5 and the Uplink port allow you to connect

an additional workstation to the hub or

interconnect the switching hub with another

switch or hub, without the use of a cross-over

cable. If you need to connect an additional

workstation to the device, use Port 5, which is

configured as MDI-X, just like ports 1 through

4. If you need to connect the device to a switch

or another hub, use the Uplink port, which is

configured as MDI.

Both Port 5 and the Uplink port offer 10 Mbps

or 100 Mbps performance and auto-negotiation

operation for both speed and duplex mode, just

like ports 1 through 4. Both ports feature an

RJ-45 connector and have a maximum

operating distance of 100 meters (328 feet)

using category 5 cable.

Note

You can use either port 5 or the Uplink

port. You cannot use both

simultaneously.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 50 51

Keine Kommentare

Allied Telesis AT-FH705E Installationsanleitung Seite 18