Allied Telesis AT-FH708E Installationsanleitung PDF herunterladen (Seite 19)

AT-FH708E V2 Installation Guide

Port 8 and the Uplink Port

Port 8 and the Uplink port allow you to connect

an additional workstation to the unit or

interconnect the unit with a switch, hub, or

router, without the use of a crossover cable. If

you need to connect an additional workstation

to the unit, use Port 8, which is configured as

MDI-X, just like ports 1 through 7. If you need

to connect the unit to an Ethernet switch, hub,

or router, use the Uplink port, which is

configured as MDI.

Both Port 8 and the Uplink port offer 10 Mbps

or 100 Mbps performance and auto-negotiation

for both speed and duplex mode, just like ports

1 through 7. Both ports feature an RJ-45

connector and have a maximum operating

distance of 100 meters (328 feet) using

Category 3, 4, or 5 twisted pair cable for 10

Mbps operation and Category 5 cable for 100

Mbps operation.

Note

You can use either port 8 or the Uplink

port. You cannot use both

simultaneously.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 50 51

Keine Kommentare

Allied Telesis AT-FH708E Installationsanleitung Seite 19