
x310 Series Installation Guide for VCStack
87
Figure 41. Installing the AT-StackXS/1.0 Transceiver in Slot S2
8. Repeat this procedure to connect additional switches to the stack with
AT-StackXS/1.0 transceivers.
9. To create the redundant path with the ring topology shown in Figure 18
on page 52 and Figure 19 on page 53, connect a stacking cable to the
empty stacking slots on the top and bottom switches.
10. After connecting the stacking cables to all the switches, go to Chapter
7, “Powering On the Stack” on page 89.
Kommentare zu diesen Handbüchern