Allied-telesis SwitchBlade 4000 Series Switch Hardware Reference Bedienungsanleitung Seite 14
- Seite / 64
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
14 SwitchBlade 4000 Series Switch
C613-03060-00 REV H
The switch’s configuration maintains the swapped-out settings. These
result in error messages on start-up, but do not affect the functioning of the
switch. The configuration can be manually edited to remove the swapped
sections that no longer apply.
4. Line Card 1 has been configured and then removed before the configuration
was saved using the create config command. The user then wishes to enter
this command, while keeping the previous configuration of the line card
that has been hot swapped out.
When the create config command is entered, the switch retains the
configuration of the line card that has been hot swapped out. For example,
if the original configuration included the command add vlan=”V2”
port=1.1-2.4, the show config dynamic command would display the
following configuration even though ports 1.1-1.8 no longer exist:
#
# vlan configuration
#
add vlan="v2" port=1.1-1.8
add vlan="v2" port=2.1-2.4
If the switch is then restarted, some of the commands fail and the resulting
dynamic configuration is:
#
# vlan configuration
#
add vlan="v2" port=2.1-2.4
#
# vlan swapped out port configuration
add vlan="v2" port=1.1-1.8
This situation is potentially problematic because the switch has been
restarted before the line card was hot swapped back in. The remaining
examples describe possible ramifications.
5. (continuing from the end of Example 4) The switch is powered down and a
different type of line card (for example, a 48-port line card) is inserted into
slot 1. The switch is then powered up.
Ports 1.1-1.8 are configured as they were for the original 8-port line card.
The remaining ports are added to the default VLAN.
Ultimately the line card is initialised to match as many of the commands
that were previously configured as possible (some settings such as port
speed are not possible).
6. (continuing from the end of Example 4) A line card is inserted into slot 1,
and the configuration saved by using the command:
create config
The line card is initialised without configuration because the commands
stored in the swapped out configuration that refer to this slot are all
removed when the user creates a configuration.
Before the new line card was inserted, the configuration displayed by the
show config dynamic command would have been:
#
# vlan configuration
- Hardware Reference 1
- Contents 3
- Documentation Roadmap 5
- SwitchBlade Overview 7
- Power Feed Options 8
- Power Supplies 9
- Hot Swapping 10
- Hot-swapping a Line Card 11
- C613-03060-00 REV H 12
- Examples 13
- Dimensions 15
- Environmental Conditions 15
- Mounting System 16
- Regulatory Standards 16
- Power Supply Options 16
- Hardware Reference 17 17
- Hardware Reference 19 19
- Hardware Reference 21 21
- AT-SB4215 Bandwidth Expander 23
- Ethernet Line Card 24
- AT-SB4352 and AT-SB4352 V2 25
- Hardware Reference 27 27
- Switching 28
- Hardware Reference 29 29
- Line Card 31
- Alarm Relays and Monitoring 32
- How Many PSUs do You Need? 33
- Online Documentation 33
- AT-TFTP Server 34
- Switch Start-up 35
- To access help 36
- Start-up Procedures 37
- Management Interfaces 39
- RJ-45 Management Port (ETH0) 40
- Useful Cables 41
- DB9 Female Pin View 42
- DB9 Male Pin View 42
- Pin assignments 43
- 10/100BASE crossover cable 43
- Test Facility 45
- Other Interface Tests 46
- Troubleshooting 47
- Line Card LEDs 48
- Power Supply LEDs 49
- Check these first 50
- Fault LED is on 51
- Expansion Options 52
- DIMM slot 53
- Testin g DIMM 54
- Using Windows Terminal and 59
- Hyperterminal 59
- Hardware Reference 61 61
- Restricted Procedures 62
- Contacting Us 64
Verwandte Produkte und Handbücher für Computerhardware Allied-telesis SwitchBlade 4000 Series Switch Hardware Reference
(80 Seiten)LG MC-8047ARS manuels
Manuels d'utilisation et guides de l'utilisateur pour Non LG MC-8047ARS.
Nous fournissons des manuels en pdf 1 LG MC-8047ARS à télécharger gratuitement par type de document : Manuel de l'utilisateur
Kommentare zu diesen Handbüchern