Allied-telesis AT-S81 Bedienungsanleitung PDF herunterladen (Seite 274)

Chapter 28: 802.1x Network Access Control

274 Section II: Web Browser Interface

frame. The default value for this parameter is 30 seconds. The range is

1 to 600 seconds.

Server Timeout

Sets the timer used by the switch to determine authentication server

timeout conditions. The default value for this parameter is 10 seconds.

The range is 1 to 60 seconds.

Maximum Request

Sets the maximum number of times that the switch retransmits an EAP

Request packet to the client before it times out the authentication

session. The default value for this parameter is 2 retransmissions. The

range is 1 to 10 retransmissions.

Re-auth Period

Specifies the time period between periodic reauthentication of the

client. The default value is 3600 seconds. The range is 1 to 65,535

seconds.

Re-auth Status

Specifies if reauthentication should occur according to the

reauthentication period. The options are Enabled or Disabled.

4. When you are finished configuring the parameters, click Apply.

5. If the port control setting is Auto and you want to return the EAPOL

machine state on the port to the initialized state, select Yes for the

Initialize parameter and click Apply.

6. If the port control setting is Auto and you want the node connected to

the port to reauthenticate with the RADIUS server, select Yes for the

Re-auth Initialize parameter and click Apply.

1 2 ... 269 270 271 272 273 274 275 276 277 278 279 ... 313 314

Keine Kommentare

Allied-telesis AT-S81 Bedienungsanleitung Seite 274