Allied-telesis AT-S70 Bedienungsanleitung PDF herunterladen (Seite 113)

AT-S70 Management Software User’s Guide

113

File Uploads and Downloads Overview

The firmware on the Converteon™ chassis consists of the following three

parts:

 AT-S70 management software

This is the operating software for the chassis.

 AT-S70 bootloader

This code initially controls the chassis whenever you power ON or

reset the chassis.

 System configuration

This contains the settings for the different system parameters.

Note

In the AT-S70, the management software and bootloader are

combined into one image file.

You can use the AT-S70 management software to download a new

version of the management software and bootloader onto a chassis so that

it always has the latest software.

Note

A configuration file for a Converteon™ chassis cannot be edited with

a text editor.

The methods for uploading and downloading files from a chassis are

described below:

 Local Management Session

This method uses a local management session to upload and

download a file onto a chassis. This method supports Xmodem and

TFTP. You can use this method on any type of Converteon™ chassis.

 Remote Management Session

Another method is from a remote management session of a chassis.

This can be a chassis you accessed directly through a Telnet

management session. This method uses TFTP.

Note

Occasionally, Allied Telesyn will update or revise the AT-S70

software. For more information on how to obtain the latest version of

the software updates, refer to “Obtaining Management Software

Updates” on page 13.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 133 134

Keine Kommentare

Allied-telesis AT-S70 Bedienungsanleitung Seite 113