Allied-telesis AT-S70 Bedienungsanleitung PDF herunterladen (Seite 103)

AT-S70 Management Software User’s Guide

103

The Show Remote OAM Information Menu, as shown in Figure , is

displayed.

Displaying OAM

Statistics

To display the OAM statistics, perform the following procedure:

1. From the Main Menu, select Module Status and Configuration.

The Module Status and Configuration Menu, as shown in Figure 2 on

page 91, is displayed.

2. Select a line card on which you want to configure.

3. Press <Return>.

The Module Configuration Menu, as shown in Figure 4 on page 92, is

displayed.

4. Select the port that you want to configure the OAM operations on.

5. Press <Return>.

The Port Management Menu, as shown in Figure 6 on page 92, is

displayed.

6. From the Port Management Menu, select OAM Configurations.

Show Remote OAM Information

Module = 5, Port = 1

MAC Address 00:0c:46:9a:21:c9 Mux State Forward

Parser State Forward Local Discovering Yes

Local Stable No Remote Discovering No

Remote Stable No Critical Event No

Dying Gasp No Link Fault No

OAM Version 0x01 Config Revision 0x0003

Vendor Info 0x00160001 Vendor OUI 00-30-84

Mode Active Max OAMPDU Size 1518

Loopback Support Yes Event Support No

Variable Support Yes Unidirect Support Yes

Return to OAM Configurations ...

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 131 132

Keine Kommentare

Allied-telesis AT-S70 Bedienungsanleitung Seite 103