Allied-telesis AT-S63 Bedienungsanleitung Seite 162

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 464
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 161
Chapter 12: File Download and Upload Commands
162
For an Xmodem upload, note the following:
Xmodem can download a file only onto the switch on which you
started the local management session. You cannot use Xmodem
to download a file onto a switch accessed through enhanced
stacking.
For a TFTP upload, note the following:
There must be a node on your network that contains the TFTP
server software and the file to be downloaded must be stored on
that server.
Start the TFTP server software before you perform the download
command.
The switch on which you are downloading the file must have an IP
address and subnet mask, such as a master switch of an enhanced
stack. You cannot use TFTP on a slave switch because that type of
switch typically does not have an IP address. Perform the
download from a local management session of the switch using
Xmodem, or, switch to switch using the REMOTESWITCH option.
Examples
The following command uses Xmodem to upload a switch’s
configuration file called “sw22 boot.cfg” from a local management
session:
upload method=xmodem file="sw22 boot.cfg"
After entering the command, use your terminal emulator program to
indicate where you want to store the file on your computer and its
filename.
The following command uploads a switch’s configuration file using TFTP:
upload method=tftp destfile=switch4.cfg server=149.36.11.21
file=switch4.cfg
Seitenansicht 161
1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 463 464

Kommentare zu diesen Handbüchern

Keine Kommentare