Allied-telesis AT-S63 Bedienungsanleitung PDF herunterladen (Seite 585)

100

101

AT-S63 Management Software Command Line Interface User’s Guide

Section VII: Port Security 585

of the link between the supplicant and

the switch or the switch is reset or power

cycled.

reauthperiod Enables periodic reauthentication of the client, which is

disabled by default. The default value is 3600 seconds.

The range is 1 to 65,535 seconds.

supptimeout Sets the switch-to-client retransmission time for the

EAP-request frame. The default value for this

parameter is 30 seconds. The range is 1 to 600

seconds.

servertimeout or Sets the timer used by the switch to determine

servtimeout authentication server timeout conditions. The default

value is 10 seconds. The range is 1 to 60 seconds. The

parameters are equivalent.

maxreq Specifies the maximum number of times that the switch

retransmits an EAP Request packet to the client before

it times out the authentication session. The range is 1 to

10 retransmissions and the default is 2.

ctrldirboth Specifies how the port is to handle ingress and egress

broadcast and multicast packets when in the

unauthorized state. \

When a port is set to the authenticator role, it remains in

the unauthorized state until a client is authenticated by

the authentication server. In the unauthorized state, the

port accepts only EAP packets from the client. All other

ingress packets the port might receive from the

supplicant, including multicast and broadcast traffic, are

discarded until the supplicant has been authenticated.

You can use this selection to control how an

authenticator port handles egress broadcast and

multicast traffic when in the unauthorized state. You

can instruct the port to forward this traffic to the client,

even though the client has not logged on, or you can

have the port discard the traffic.

The options are:

ingress An authenticator port, when in the

unauthorized state, discards all ingress

broadcast and multicast packets from the

client while forwarding all egress

broadcast and multicast traffic to the same

client. This is the default setting.

1 2 ... 580 581 582 583 584 585 586 587 588 589 590 ... 679 680

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-S63 Bedienungsanleitung Seite 585

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S63