Allied-telesis AT-S62 Bedienungsanleitung PDF herunterladen (Seite 40)

100

101

Chapter 2: Starting a Local or Telnet Management Session

40 Section I: Basic Operations

Local Management Session

To establish a local management session, you connect a terminal or PC

with a terminal emulator program to the RS-232 terminal port on the

switch. The RS232 Terminal Port is located on the front panel of the

AT-8516F/SC, AT-8524M, and AT-8524POEswitches and the back panel

of the AT-8550GB and AT-8550SP switches.

A local management session is so named because you must be close to

the switch, usually within a few meters, to start this type of management

session, meaning you must be in the wiring closet where the switch is

located.

A switch does not need an IP address to be managed from a local

management session, and a local management session will not interfere

with the switch’s forwarding of packets.

Starting a local management session on a switch configured as a Master

switch allows you to manage all the switches in the same enhanced stack.

This relieves you of having to start a separate local management session

for each switch, simplifying network management.

Starting a local management session on a switch that is not part of an

enhanced stack or that is a slave switch allows you to manage just that

switch.

Note

For information on enhanced stacking, refer to “Enhanced Stacking

Overview” on page 80.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 821 822

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-S62 Bedienungsanleitung Seite 40

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S62