Allied-telesis AT-S62 Bedienungsanleitung Seite 60

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 760
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 59
Chapter 4: Basic Switch Parameters
Section I: Basic Operations 60
The following prompt is displayed:
DHCP/BOOTP/DISABLE (1-DHCP, 2-BOOTP, 3-DISABLE) :
4. Type 1 to activate DHCP, 2 to activate BOOTP, or 3 to disable both
application protocols. The default is disabled.
Note
If you activate the BOOTP or DHCP client software, the switch
immediately begins to query the network for the corresponding
server. The switch continues to query the network for its IP
configuration until it receives a response.
Any static IP address, subnet mask, or gateway address manually
assigned to the switch is deleted from the System Configuration
menu and replaced with the value the switch receives from the
BOOTP or DHCP server. If you later disable BOOTP or DHCP, these
values are returned to their default settings.
5. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Seitenansicht 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 759 760

Kommentare zu diesen Handbüchern

Keine Kommentare