Allied-telesis AT-S47 Bedienungsanleitung Seite 94
- Seite / 154
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Section III: Command Line Interface
94
SET IP
Syntax
set ip ipaddress=ipaddress mask=subnetmask
gateway=ipaddress manager|1|2|3|4=ipaddress
Parameters
ipaddress Specifies an IP address for the multiplexer. An IP
address is required to manage the unit using
Telnet or an SNMP application program. An IP
address is not required for local management
through the RS232 port on the management
module. The multiplexer does not require an IP
address for normal network operations.
mask Specifies the subnet mask for the multiplexer. You
must specify a subnet mask if you manually
assigned the multiplexer an IP address.
gateway Specifies the IP address of the default gateway for
the multiplexer. The default gateway is required if
a remote management station is separated from
the multiplexer by a router.
manager Assigns a number (1 to 4) to the IP address of a
management workstation to be sent traps from
the multiplexer. To delete an IP address without
assigning a new one, enter 0.0.0.0 as the IP
address.
Description
This command configures the following multiplexer parameters:
❑ IP address
❑ Subnet mask
❑ Gateway address
This command is also used to specify the IP addresses of up to four
management workstations to receive management traps from the
multiplexer. In entering the command, you specify a number from 1 to 4
to be assigned to the IP address. For more information on the SNMP
traps, refer to SET SNMP TRAP on page 103.
- User’s Guide 1
- 2003 Allied Telesyn, Inc 2
- Table of Contents 3
- Section III 4
- Command Line Interface 4
- List of Figures 7
- How This Guide is Organized 9
- Document Conventions 10
- Contacting Allied Telesyn 12
- Getting Started 13
- Local Management Session 15
- Section I: Getting Started 16
- Quitting a Local 17
- Management 17
- Using the Terminal Interface 19
- Telnet Management Session 20
- < to > _ 21
- Quitting a 22
- SNMP Management Session 23
- Menu Interface 24
- Basic Multiplexer Parameters 25
- Section II: Menu Interface 26
- Parameter Description 28
- Naming the Multiplexer 29
- Pinging a Remote System 32
- Configuring the RS-232 Port 35
- 4. Return to the Main Menu 36
- Statistics Menu 37
- Individual channel overview 37
- RLL Error (TX) 37
- RLL Error (RX) 37
- Return to Main Menu 37
- Running Diagnostics 40
- Module Parameters 43
- Displaying Module Status 44
- 1 thru 8 45
- Description 46
- Module Status 46
- Configuring a Module 48
- Multiplexing 49
- Port Settings 49
- Module Settings 52
- Power Supply 53
- Fan Module 54
- Settings 54
- Link Test 55
- Overview 56
- Missing Link 59
- Failure of fiber cable 61
- Activity Monitor 63
- Activity monitor 64
- 0:00:00:00 WDM02 CStart 64
- 0:00:00:00 M11-PA Online 64
- Specifying a SysLog Server 65
- Modifying the 67
- Password 67
- Enabling or 68
- Disabling the 68
- Access Methods 68
- Specifying a 68
- Timeout Value 68
- Access Method Description 69
- Obtaining Software Updates 71
- Formatting 78
- Command Reference 79
- Basic Command 80
- Line Commands 80
- Multiplexer 81
- Activity Log 84
- AT-S47 Interface 85
- Security 85
- AT-S47 Image 86
- Download 86
- Basic Command Line Commands 87
- Basic Multiplexer Commands 92
- ENABLE BOOTP 97
- DISABLE BOOTP 98
- SHOW CONFIG 99
- SET SYSTEM 100
- SHOW SYSTEM 101
- SET SNMP COMMUNITY-STRING 102
- SET SNMP TRAP 103
- SHOW SNMP 105
- RESTART REBOOT 107
- SHOW DIAG 108
- SHOW PORT COUNTER 109
- RESET PORT COUNTER 110
- Module Commands 111
- SET LOCAL PORT 112
- SET REMOTE PORT 113
- SHOW MODULE 115
- SET MODULE NAME 116
- SHOW GBIC MODULE 117
- SHOW GBIC VENDOR MODULE 118
- Link Test Commands 119
- ENABLE MODULE LINKTEST 120
- DISABLE MODULE LINKTEST 121
- Missing Link Commands 122
- ENABLE MISSLINK 123
- DISABLE MISSLINK 124
- Activity Log Commands 125
- SHOW LOG 126
- ENABLE LOG 127
- DISABLE LOG 128
- AT-S47 Interface Security 130
- Commands 130
- Command Function Page 131
- SET PASSWORD 132
- SHOW CONSOLE 133
- ENABLE CONSOLE 134
- DISABLE CONSOLE 135
- SET CONSOLE 136
- ENABLE TELNET 137
- DISABLE TELNET 138
- SET TELNET 139
- AT-S47 Image Download 140
- SET LOADER PASSWORD 143
- AT-S47 Default Settings 144
- Settings Default 145
- AT-WDM02 Activity Log Events 146
- Status Activity Explanation 147
Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S47
(2 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.153 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern