Allied-telesis AT-PBC18 Bedienungsanleitung Seite 39

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 120
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 38
PowerBlade PBC18 Installation Guide
39
Note
This system will work with a positive grounded or negative
grounded DC system. ! 20
h. Connect the three DC wires to a DC power source.
7. Check that the PWR1 LED on the front of the chassis is green. If the
LED is OFF, refer to Troubleshooting on page 99 for assistance.
The PowerBlade PBC18 is now ready for use. Proceed to Installing a
Media Converter Module on page 43 or Installing a Switch Module on
page 77 for further instructions.
Seitenansicht 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 119 120

Kommentare zu diesen Handbüchern

Keine Kommentare