Allied-telesis AT-MCF2012LC/1 Bedienungsanleitung PDF herunterladen (Seite 50)

Chapter 2: Installation

5. Align the edges of the module with the guides in the

slot and carefully slide the module into the chassis until

it is flush with the front of the chassis. Refer to Figure

11. Light pressure may be necessary to firmly seat the

module connector on the connector on the back panel

of the chassis.

Caution

Do not force the module into place. Doing so may

damage the connector pins on the backplane of the

chassis. If there is resistance, remove the module and

reinsert it after verifying that the edges of the card are

properly aligned with the guides in the chassis’

module slot.

Figure 11. Installing the Media Converter Module

T-M

1121-a

AT-MCF2012LC

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 63 64

Keine Kommentare

Allied-telesis AT-MCF2012LC/1 Bedienungsanleitung Seite 50