
Chapter 9: Link Aggregation Control Protocol (LACP)
118
5. Select the Load Balance Method. Choose from the following:
Src MAC— Source MAC address as the load distribution method.
Dst MAC— Destination MAC address.
Src-Dst MAC— Source address/destination MAC address.
Src IP— Source IP address.
Dst IP— Destination IP address.
Src-Dst IP— Source address/destination IP address.
6. Add or remove the member ports of the aggregator by clicking on the
ports.
A check mark indicates the port has been selected.
7. Click Apply.
A confirmation message is displayed.
8. Click SAVE
to save your changes to the startup configuration file.
Kommentare zu diesen Handbüchern