Allied-telesis AT-FS724 Bedienungsanleitung PDF herunterladen (Seite 26)

,QVWDOODWLRQ

2-6

5. Apply power to the unit as follows:

Caution

Power cord is used as a disconnection device. To de-energise

equipment disconnect the power cord.

Attach the power cord to the unit and plug it in the power

source. Verify that the POWER LED lights green. See Table 2-1

on page 2-4.

As power is applied to the switch, the FAULT LED flashes as the

switch runs internal self testing.

If the POWER LED does not light green, see Chapter 3,

"Troubleshooting", for further information.

6. Connect the data cables, making sure each connection has a good

valid link and that the switch is receiving packets.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 67 68

Keine Kommentare

Allied-telesis AT-FS724 Bedienungsanleitung Seite 26