Allied-telesis AT-8600 Series Switch Bedienungsanleitung PDF herunterladen (Seite 14)

14 AT-8600 Series Switch

LEDs on AT-8600 Series Switches

The following tables outline how the switch and expansion modules report faults

and operational activities. Expansion modules are optional and can be purchased

separately. Contact an Authorised Allied Telesyn distributer or reseller, or visit

www.alliedtelesyn.com for more information on purchasing expansion modules.

System LEDs

LED State Description

FAULT Off Switch operation is normal.

Red The switch or management software is

malfunctioning

1 flash A switch fan has failed.

7 flashes An expansion module has been inserted or

removed while the switch is powered on.

MASTER This LED is not supported and will never be lit.

RPS This LED is not supported and will never be lit.

PWR Green The switch is receiving power and the

voltage is within the acceptable range

Link and Mode LEDs for the AT-8624T/2M switch

LED State Description

LINK OFF There is no link between the port and the

end-node.

Green A valid link has been established between

the port and the end-node.

Mode - COL OFF No data collisions are occurring on the

port.

Flashing Green Data collisions are occurring on the port.

Mode - 100 OFF The port is operating at 10 Mbps.

Green The port is operating at 100 Mbps.

8600isg.fm Page 14 Wednesday, June 22, 2005 2:46 PM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Keine Kommentare

Allied-telesis AT-8600 Series Switch Bedienungsanleitung Seite 14