Allied-telesis AT-2911GP Network Adapters Bedienungsanleitung PDF herunterladen (Seite 113)

Chapter 6: Modifying Advanced Properties

113

Priority & VLAN

The Priority & VLAN feature allows you to control sending and receiving

tagged frames of QoS and VLAN.

Note

When you install the AT-MUX utility on your system to bridge frames

from the copper port to the fiber port, set a priority and VLAN ID in

the AT-MUX utility. See “Accessing the AT-MUX Utility” on page 69.

When the property is set to Priority & VLAN Enabled, the adapter sends

and receives QoS and VLAN tagged frames; with Priority Enabled, the

adapter sends and receives QoS tagged frames; with VLAN Enabled,

the adapter sends and receives VLAN tagged frames. To assign a VLAN

ID to the adapter, see “VLAN ID” on page 126.

To enable or disable the Priority & VLAN feature, do the following:

1. Access the Advanced Properties.

See “Accessing Advanced Properties” on page 87.

2. Select Priority & VLAN in the Property box.

The Priority & VLAN page is displayed as shown in Figure 75.

Figure 75. Priority & VLAN Page

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 151 152

Keine Kommentare

Allied-telesis AT-2911GP Network Adapters Bedienungsanleitung Seite 113