Allied-telesis AR700 SERIES Software Release 2.7.1 Bedienungsanleitung PDF herunterladen (Seite 66)

66 AR700 Series Router User Guide

Software Release 2.7.1

C613-02047-00 REV A

To display the modules in the router that are configured to use an Ethernet

interface, and the encapsulations used on an interface, enter the command:

show eth=n configuration

where n is the number of the Ethernet interface.

For more information about Ethernet interfaces and encapsulations, see the

Interfaces chapter in the Software Reference.

Asynchronous Port

Asynchronous ports are normally used to connect a terminal to the router for

configuration purposes. The default values for configurable parameters are

modified by entering the command:

set asyn=port-number option

The factory default settings for asynchronous ports are shown in Table 8 on

page 66.

For more information about asynchronous ports, see the Hardware Reference

or the Interfaces chapter in the Software Reference.

Table 8: Factory defaults for configurable parameters for asynchronous ports.

Option Default setting

ATTENTION BREAK

CDCONTROL IGNORE

DATABITS 8

DEFAULTSERVICE FALSE

DTRCONTROL ON

ECHO ON

FLOW HARDWARE

HISTORY 30

INFLOW HARDWARE

IPADDRESS NONE

IPXNETWORK NONE

MAXOQLEN 0 (Unrestricted)

MTU 1500

NAME Asyn #

OUTFLOW HARDWARE

PAGE 22

PARITY NONE

PROMPT DEFAULT (CMD>)

SECURE ON

SERVICE NONE

SPEED AUTO

STOPBITS 1

TYPE VT100

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 117 118

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AR700 SERIES Software Release 2.7.1 Bedienungsanleitung Seite 66

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AR700 SERIES Software Release 2.7.1