Allied-telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT Bedienungsanleitung PDF herunterladen (Seite 75)

Note - The current firmware version returns a "noSuchName" value for the

following parameters:

 Alignment Error Frames

 Multi Collision Frames

 SQE Test Errors

 Deferred Transmissions

 Excessive Collisions

 Internal MAC Transmit Errors

 Carrier Sense Errors

 Symbol Errors

Additional Info

Displays information about a table containing 64-bit versions of error counters.

Note - The current firmware version is unable to display any value for the Port

Number and Alignment Error Frames (HC) parameters.

Note - The current firmware version returns a ‘noSuchName’ value for the Internal

MAC Transmit Errors (HC) and Internal MAC Received Errors (HC) parameters.

Detail Info

Displays detailed port information such as duplex mode.

Note - The current firmware version does not allow the following parameters to be

configured:

 Tagged Mode

 Default Priority

 Row Status

 Port Flow Control Config

 Port Speed

 Reactivate

 Combo Ethernet Config

Note - Device Manager does not handle 8-bit string parameters correctly. As a

result, the Autonegotiation Capabilities Config parameter will display an

unrecognizable value and will not be configurable. The Autonegotiation Capabilities

Status and Remote Autonegotiation Capabilities parameters will also display

unrecognizable values.

Note - The Physical Address Type parameter is not applicable to the AT-8000S

series and should be ignored.

Note - The combo ports will not display the Port Context Menu on right-mouse

click if logged-on in SNMPv3 mode using a user account with no read-write access

to the Transceiver Type parameter.

AlliedView™-EMS 4.0.1 Device Management Guide Page 75 of 411

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 410 411

Keine Kommentare

Allied-telesis AlliedView-EMS 4.0.1 DEVICE MANAGEMENT Bedienungsanleitung Seite 75