Allied-telesis AT-SBx3106WMB Bedienungsanleitung PDF herunterladen (Seite 27)

AT-SBx3106WMB Wall Mounting Brackets Installation Guide

31.0 cm (12 in.) to 15.0 cm (6 in.).

 If you are installing the chassis on wallboard, be sure to position

the screw holes over the centers of the studs in the wall. If you

have not already done so, use a stud finder to locate the studs. For

additional recommendations, refer to “Wallboard Requirements” on

page 16.

Caution

Do not install the chassis on a wall that has metal studs. Metal studs

may not be strong enough to safely support the chassis.

2. After positioning the bracket on the wall, use a pen or pencil to mark

the wall with the locations of the two screw holes in the bracket. Refer

to Figure 9.

Figure 9. Marking the Screw Holes for the Top Bracket

3. Measure 50.6 cm (19 7/8 in.).vertically down from the hole marks you

made in the previous step and mark the two screw holes for the bottom

bracket. Refer to Figure 10 on page 28.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Keine Kommentare

Allied-telesis AT-SBx3106WMB Bedienungsanleitung Seite 27