Allied-telesis AT-S80 Bedienungsanleitung PDF herunterladen (Seite 147)

AT-S80 Management Software User’s Guide

Section I: Using the Menus Interface 147

The Port Priority Configuration Menu is shown in Figure 33.

Figure 33. Port Priority Configuration Menu

The columns in the menu display the following information:

Port

Displays the port number.

Trunk

Displays the trunk number if the port is a member of a trunk.

Traffic Class

Displays the temporary priority level applied to the untagged traffic that

enters the port. For example, in the figure above the untagged traffic

received on port 2 is assigned a temporary priority value of 5.

Queue

Displays the queue where the untagged packets received on the port

are stored on the egress port. For example, in the figure above the

untagged traffic received on port 2 is assigned a temporary priority

level of 5 and is stored in queue 2 on the egress port.

Override

Displays whether the temporary priority value is being applied to the

untagged packets on the port. If this field is set to Disable, all untagged

Quality of Service Configuration -> Port Priority Configuration Menu

QoS Status: Enabled

Port Trunk Traffic Class Queue Override

---- ----- ------------- ----- --------

1 --- 0 Disabled

2 --- 5 2 Enabled

3 --- 0 Disabled

4 --- 0 Disabled

5 --- 0 Disabled

6 --- 0 Disabled

7 --- 0 Disabled

8 --- 7 3 Enabled

9 --- 0 Disabled

10 --- 0 Disabled

11 --- 0 Disabled 3: Highest

12 --- 0 Disabled 0: Lowest

----------------------- <COMMAND> -----------------------------------------

[N]ext Page Set P[r]iority Queue Set [T]runk Priority Queue

[P]revious Page Set [O]verride Status Set Trun[k] Override Status

[Q]uit to previous Page

Command>

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 345 346

Keine Kommentare

Allied-telesis AT-S80 Bedienungsanleitung Seite 147