Allied-telesis AT-S100 Bedienungsanleitung Seite 267

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 274
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 266
AT-S100 Management Software User’s Guide
Section II: Advanced Configuration 267
VLAN
Syntax
vlan <2-4094> name NAME state enable|disable
Parameters
<2-4094> Indicates the VLAN ID. Enter a value between 2 and 4094.
name Indicates the name of the VLAN. Enter a text value.
state Indicates the active state of the VLAN. Choose from the
following:
enable Activates the VLAN.
disable Inactivates the VLAN.
Caution
You may not create a VLAN with a VLAN ID of 1. This is the default
VLAN.
Command Mode
VLAN Configuration mode
Description
Use the VLAN command to create a VLAN, assign a name to it, and set
the state of the VLAN.
Example
The following commands create a VLAN 2 with a name of “Sales” and
enable it:
switch# configure terminal
switch(config)# vlan database
switch(config-vlan)# vlan 2 name Sales state enable
Related Commands
“VLAN ACCESS-MAP” on page 268
“VLAN DATABASE” on page 269
Seitenansicht 266

Kommentare zu diesen Handbüchern

Keine Kommentare