Allied-telesis AT-MC13 Bedienungsanleitung PDF herunterladen (Seite 35)

AT-MC13 Media Converter Installation Guide

If the NORMAL LED on the AT-MC13 is OFF, do the following:

 Check that the end-nodes connected to the media converter are

powered ON.

 Check that the fiber optic cable is securely connected to the fiber

optic port.

 Verify that the appropriate fiber optic cable is being used. Refer to

Table 4 on page 39 and Table 5 on page 39 for the fiber optic cable

specifications.

 Verify that the maximum allowable loss budget for the fiber optic

cable has not been exceeded.

If you are still experiencing problems after troubleshooting the installation,

contact Allied Telesis Technical Support for assistance. Refer to

“Contacting Allied Telesis” on page 12 or visit our web site at

www.alliedtelesis.com for support information.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Keine Kommentare

Allied-telesis AT-MC13 Bedienungsanleitung Seite 35