Allied-telesis AT-FS724i Bedienungsanleitung PDF herunterladen (Seite 24)

Installation

3. Attach the rackmounting brackets to each side of the switch using the

screws provided. See Figure 7.

Figure 7 Attaching the Rackmounting Brackets to the Switch

4. Secure the switch to the rack using 2 screws (not provided) for each side as

shown in Figure 8.

Figure 8 Installing the Switch to the Rack

5. Apply power to the switch by plugging one end of the power cord to the

power receptacle and the other end to a power outlet. Verify that the

POWER LED is green. If the LED is OFF, refer to “Troubleshooting” on

page 15.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 43 44

Keine Kommentare

Allied-telesis AT-FS724i Bedienungsanleitung Seite 24