Allied-telesis AT-FS705PD Bedienungsanleitung PDF herunterladen (Seite 26)

Installation

4. Position the switch horizontally onto the wall screws, as illustrated in

Figure 7.

Figure 7 Positioning The Switch Onto The Wall Screws

5. Connect the twisted pair cables to the twisted pair ports.

When connecting a twisted pair cable to a port, observe the following

guidelines:

❑ An RJ-45 connector should fit snugly into the port on the switch. The

tab on the connector should lock the connector into place.

❑ You should check to be sure that you are using the appropriate type of

twisted pair cabling. Refer to Table 3 on page 12 for twisted pair cable

specifications.

❑ Since the twisted pair port, when operating in Auto-Negotiation, is

Auto MDI/MDI-X, you can use either a straight-through or crossover

twisted pair cable to connect any type of network device to a port on

the converter.

Caution

POE and power cord are used as disconnection devices: To de-energize

equipment, disconnect the POE and the power cord.

-F

5 P

ort F

t E

erne

t S

witch

ere

d D

ice

100M

LIN

K/A

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 47 48

Keine Kommentare

Allied-telesis AT-FS705PD Bedienungsanleitung Seite 26