Allied-telesis AT-FS705LE Bedienungsanleitung PDF herunterladen (Seite 16)

Overview

Note

In order for a twisted pair port on the

AT-FS705LE switch to successfully Auto-

Negotiate its duplex mode with an end-

node, the end-node should also be using

Auto-Negotiation. Otherwise, a duplex

mode mismatch can occur. The twisted

pair port, using Auto-Negotiation, will

default to half-duplex if it detects that

the end-node is not using Auto-

Negotiation. This will result in a

mismatch if the end-node is operating at

a fixed duplex mode of full-duplex.

Port 5 and the Uplink Port

Port 5 and the Uplink port allow you to connect

an additional workstation to the switch or

interconnect the switch with another switch or

hub, without the use of a crossover cable. If you

need to connect an additional workstation to

the switch, use Port 5, which is configured as

MDI-X. If you need to connect the switch to

another Ethernet switch, use the Uplink port,

which is configured as MDI.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

Keine Kommentare

Allied-telesis AT-FS705LE Bedienungsanleitung Seite 16